A manual transmission (which is also called a standard transmission) uses conventional gears. All of these gears are turning at all times when the engine is running and the clutch is released. When a gear is selected with the gear shift, the gear is being attached to the output shaft. Then to change gears, the clutch is depressed and the next gear is selected which attaches that gear to the output shaft. The gears are manually
selected.
An automatic transmission uses _sun and planet_ gears. A _sun and planet_ gear set has a central _sun_ gear with _planetary_ gears (typically three or four) located around the _sun_ gear. These gears can rotate, turn or hold to create different speeds and directions. To select the gears there are multiple clutch packs and/or bands that are hydraulically applied by a valve body to control gear selection.
Types of Automatic Transmission Fluid:
There are 30 or more different types of transmission fluid for today_s modern vehicles. All the fluids look the same. Refer to the owner_s manual to select the correct fluid. Aftermarket suppliers make fluids that are compatible with multiple different vehicles. When choosing aftermarket fluids, be sure that the specified fluid in the owner_s manual is listed on the aftermarket bottle.
Lubricants Used in Standard Transmission:
The lubricants used in a standard (or manual) transmission on modern vehicles have multiple types of fluid. Be sure that the fluid installed in the vehicle meets the manufacturer's specifications.
The lubricants used in a standard (or manual) transmission on modern vehicles have multiple types of fluid. Be sure that the fluid installed in the vehicle meets the manufacturer's specifications.
Lubricants Used in Differentials:
Most differentials use conventional 80-90 gear oil. The 80-90 numbers indicate the weight and viscosity of the oil. (These are similar to the API and SAE discussed in Chapter 5). Some vehicles require special fluids. Be sure the fluid meets the manufacturer_s specifications. Limited slip differentials may require an additional
additive.
Most differentials use conventional 80-90 gear oil. The 80-90 numbers indicate the weight and viscosity of the oil. (These are similar to the API and SAE discussed in Chapter 5). Some vehicles require special fluids. Be sure the fluid meets the manufacturer_s specifications. Limited slip differentials may require an additional
additive.

Comments
Post a Comment